Imada DI-11 Series i Torque Calibrators

Features

Series i Torque Calibrators

Torque Calibrators for Power Drives & Wrenches Series i

The Series i torque calibrator measures the peak torque non-impact electric/air drivers apply to a screw. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.

Unique Smart Adapters

The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with Imada’s SW-1SV-USB software.
The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.

What’s Included

All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC?charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.
Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).

Series i Standard Features

Wide measuring range up to 174 lbf-in
Selectable units lbf-in, Kgf-cm, N-cm and N-m
Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-11 come with spring adapters
Peak, Real Time and Peak Down measuring modes (selectable)
Measure both clockwise and counterclockwise
USB?virtual COM?port sends peak (1 data) or continuous data (12 or 180 data/second)
Statistics: number of data, Max, Min, Avg
Heavy-duty metal construction
Runs on internal NiCad batteries or AC adapter
3/8? drive for socket wrenches

Specifications

Specifications - Driver Adapters (2 included)
--	Adapter	Model	Range lbf-in	Top Screw	Operational life
i-8	Smart	OW-025E OW-10E	2 9	6-32 6-32	10,000 hrs 8,000 hrs
i-80	Smart	OW-20E OW-60E	18 53	6-32 1/4-20	5,000 hrs 5,000 hrs
CD-150M	Spring	SJ-50 SJ-130	8~50 50~130	5/16-18 3/8-16	2,500 uses 2,500 uses
DI-11	Spring	SJ-50 SJ-200	8~50 50~175	5/16-18 3/8-16	2,500 uses 2,500 uses

Series i Ranges (Resolution)

Accuracy: ±0.5% F.S. ±1 LSD

Ranges
Model	Capacity
--	lbf-in	kgf-cm	N-cm	N-m
i-8	0.020~6.970	0.020~8.000	0.20~78.60?	-
i-80	0.20~69.70	0.20~80.00	2.0~786.0	0.020~7.860
CD-150M	1.0~130.0	1.0~150.0	1.0~1500	0.10~15.00
DI-11	1.0~174.0(0.1)	1.0~200.0(0.1)	-	0.10~20.00 (.01)